Putting Out An Electric Fire At Home – Here’s Your Know-how

Pinterest

All fire extinguishers employ letter-based systems to determine which type of fire they are appropriate for. And as per them any fire that results due to electrical equipment categorise as Class-E fires.

Also known as electrical fires, they happen when electrical appliances, plugs and cables are very old or are wired poorly. Another thing to be careful with these electrical appliances and circuits is that just because there is no fire, it doesn’t mean that there won’t be any fire risks.

What makes electrical fires so difficult to handle is because a fire extinguisher cannot stop it. And mistakenly using the wrong extinguisher, then it could result in more damage and increased life’s risk. 

So, How To Tackle It?

Jeff Rodney Smith:- an electrician serving Inner West says clearly:-

“You can do is use a CO2 fire extinguisher or a power and water mist extinguisher that come with special nozzles to bring out non-conductive microscopic droplets.”

Jeff also points out these other preventative measures to prevent or mitigate electrical fires.

As electrical appliances such as kettles, iron and toasters use plenty of amps; so use them in sockets by themselves.

Try to avoid a socket overload by not plugging too many electrical items into an extension lead. And whenever you think of fitting or replacing an electrical fuse, ensure that you are putting in the right one.

Also, remember that the fuse breaks when something is problematic with the appliance or is giving out a potential sign. Do check and possibly rectify the issue. These can lead to potential fire risk in your house.

Putting Out An Electrical Fire:-

Many times, despite all the efforts, it can be very difficult to put out an electrical fire once it starts. Still, here are some smart suggestions to employ.

  • The first thing you should look to do is disconnect the electricity source, which happens to be the main source of the fire. And if you find the appliance to be the source of fire, unplug it as soon as possible.
  • Take protection like rubber gloves and reach the electrical panel and turn it off. This will kill the electricity and save you from risks of electrocution.
  • If a fire starts in an appliance or at some overloaded cord after unplugging the main source of power, toss some baking soda over the flame. Baking soda is known to contain Sodium bicarbonate- a prime chemical compound used in class C fire extinguishers. This is specific to small-sized appliances like toaster or crockpots when they burst into flames.
  • And most importantly, never use water on an electrical fire, even though this may be your first instinct. Water is a good conductor of electricity, and when tossing it into the flames, it will put you at risk of lethal electrocution.

Last Words:

Still; when putting out an electrical fire; you will have to take lots of life-threatening risks- clearly when you don’t have to. Take the smart way and contact a reliable electrician serving Sydney Inner West to deal with it.

Having dealt with so many residential and commercial electric issues (including flickering appliances and electrical fires), they will know exactly what to do.

So, next time you get signs of a possible electrical problem at home, don’t hesitate to contact ‘professional and reliable electricians near Sydney.’  They are your best chances of staying safe and keeping the damages to a minimum.

Pinterest

admin

Leave a Reply

Your email address will not be published. Required fields are marked *