Signs You May Encounter After the Load Bearing Wall is Removed



After the load-bearing wall is being removed, you need to keep an eye for finding out the signs of damage in your property to make sure there is no such trace left.

Are you planning to remove one of two load-bearing walls of your house as a part of your home renovation process? In that case, you should be keeping yourself ready for better protection of the ceiling as well as the overall structure of the house to prevent it from falling.

However, removing the load-bearing wall is always an issue that requires special attention. You ought to keep an eye on the common signs that often appear just after the load-bearing wall is being removed. You need to keep an eye on all these minute details to make sure the ceiling does not fall on your head and injure you severely.

Here are some of the signs on which you need to pay attention to.

The Ceiling has Sagged 2 Inches

Well, after the professionals of load-bearing wall removal in Perth are done with their work, you are sure to find out that the ceiling has sagged quarter or a half-inch. It’s natural! 

However, if the ceiling sags more than 2 inches, in that case, you should consider it as a warning sign. It means that the ceiling is not resting on adequate support. Don’t delay to call up the professional structural engineer right away and fix this issue.

The floor on the Upper Level will Start to Sag

Just like the ceiling will start to sag, the floors on the upper levels of the second or third storey will also begin to sag down. However, it will turn out to be an alarming sign when you find out that the upper floor has started to sag only in those areas under which the load-bearing wall is located. 

Appearance of Cracks

Don’t ignore the cracks appearing on your plastered wall or drywall after the load-bearing wall is removed, or you have got the lintel replacement in Perth done by the professional experts because those could be the results of the activities. The stress can be generated from the frame movements or when proper support has not been given to the structure.

Doors are Rubbing the Floor Too Hard

One situation that can also indicate that there is something wrong after the load-bearing wall removal is when the doors start to rub the floor too hard. You may hear a creaking sound as soon as the door is being pulled or pushed. 

Although the same situation occurs when the moisture level becomes high in the air if it is happening just after the load-bearing wall removal, you need to pay some attention to the sagging part even more.

So, these are some of the situations or signs you should never ignore if you have carried out the load-bearing wall removal lately. Whenever you find out any of the symptoms, don’t delay any further to call up the structural engineer at your rescue.



Leave a Reply

Your email address will not be published. Required fields are marked *