Telltale Signs of a Potential Problem With Your Sewer Pump and Its Causes


Sewer pumps are subjected to multi-level use and hence may experience failure at one point of time. They come in different designs and yet irrespective of their built these pumps are not engineered to last a lifetime. Regular wear and tear results in issues, which can be identified with the help of signs indicating a pump failure.

Here the chief objective is to help people know about sewer pump failure symptoms so that they can prepare for some potential investments on repairs and replacements if required.

A sewer pump is engineered for removing solid wastes by collecting the same at various drainage points and taking them through the septic lines in operation until finally disposing such wastes into a designated disposal zone. If you have got a sewer ejector pump and fear that some day or the other it may encounter a problem, there are some signs for you to get familiar with so that you can save the system just on time.

In most cases these sewer ejection pumps last for 10 years or more however depending upon the usage. A well maintained sewer ejector pump can last even a few more years. This however doesn’t mean the machine won’t run into a problem. In order to ensure that the pump works smoothly you must focus on its maintenance needs. Meanwhile, do not forget to look for signs that indicate a potential issue arising with the functional condition of a sewer pump.

Signs of a sewer pump failure

Look for these indicative signals to save your sewer ejector pump from complete failure

  • Too much of dirty water entering the system
  • The pump won’t start or will take time to start
  • Constant cycling of the pump
  • The pump starts making unlikely sounds

Two common reasons why sewer ejection pumps fail

Almost all sewer ejection pumps come with a “float switch” which allows the machine to pump out floats automatically as the fluid levels rise. At times however, this switch may stop working and there are chances, homeowners will bypass the route involving the activation of the float switch by directly connecting the pump with the power source. Though this might offer a temporary solution yet, if homeowners continue connecting the Sewer Pumps Sydney to the direct power source, chances are likely that its functionality may get affected and you may have to seek Sewer Pump repair in Wollongong. The continuous power source will prompt the motor to work constantly triggering possibilities of sudden failure.

Another common reason why the pump may fail is because of blockage in discharge lines. Clogs are common in sewer lines. A sewer ejector pump is designed to push away the wastes it collects at drainage points and a possible clogging in the drainage system may cause overheating of the pump as it will constantly try to push back the effluent through the discharge lines. The backup will then pressurise the pump into giving extra force which will further lead to its damage.

If there are clogs down the line or the float switch has stopped working, call up a plumber who will be able to address the problem straight away.



Leave a Reply

Your email address will not be published. Required fields are marked *